GIWL-60-I-70-1L-MR15
One layer of Gyproc Moisture Resistant 15mm to one side of Gypframe 60 I 70 ‘I’ Stud framework forming an independent lining where there is no requirement to satisfy any performance criteria. For heights up to 3300mm.
Read more
Read less
Maximum Height (mm)
3300
GIWL-60-I-70-1L-MR15
Products
| Stud | Gypframe 60 I 70 'I' Stud |
| Fixing T | Gypframe GFT1 Fixing 'T' |
| Fixing strap | Gypframe GFS1 Fixing Strap |
| Base channel | Gypframe 62 FEC 50 Folded Edge Standard Floor & Ceiling Channel |
| Head channel | Gypframe 62 FEC 50 Folded Edge Standard Floor & Ceiling Channel |
| Sealant | Gyproc Sealant |
| Thermal sealant | Gyproc Sealant |
| Abutments and openings | Gypframe 60 S 50 'C' Stud |
| Board side 1 | Layer 1: Gyproc Moisture Resistant 15mm |
| Screws side 1 | Layer 1: British Gypsum Jack-Point Screws 25mm |
Details
This section should be read in conjunction with the Products list.
- Abutment Fixing: Gypframe 'C' stud suitably fixed to structure at 600mm centres.
- Background: Suitable structural background.
- Base Channel Fixing: Gypframe channel suitably fixed to floor at 600mm centres.
- Deflection Allowance: Vertical deflection only. To be determined by a Structural Engineer.
- Finishing Requirements: Finishing is not required to achieve the specified performance, but the system can be finished using either one of our Thistle or ThistlePro plasters, or Gyproc jointing products. See the product range guides on the British Gypsum website for more information.
- Fixing Strap: Used to support horizontal board joints and enable board screw fixing at 300mm centres.
- Fixing T: Used to support horizontal board joints and enable board screw fixing at 300mm centres.
- Loadbearing: No
- Maximum Height: The maximum heights quoted are based upon a limiting deflection of L/240 at 200 Pa.
- Screw: Board layer 1, fix securely to Gypframe metal supports around the perimeter of the board and intermediate stud positions at maximum 300mm centres. External corners reduce fixings to 200mm. Drywall screws can be used for fixing boards to metal profiles with a thickness of 0.8mm or less (excluding 'I' studs). Fix working from the centre of each board. Position screws not less than 13mm from cut edges and 10mm from bound edges of boards. Set screw heads flush with plasterboard surface; do not break paper or gypsum core.
- Sealant: Locate sealant at junctions with adjoining structure and other air paths. Apply as a continuous bead to clean, dry, dust-free surfaces, leaving no gaps. After application of sealant, bulk fill gaps between floor and underside of plasterboard using Gyproc jointing compound.
- Stud Centres (mm): 600 mm
- Approx. Weight (kg/m2): 13 kg/m²
- Head Channel Fixing: Gypframe channel suitably fixed to soffit at 600mm centres.
- Minimum Cavity / Offset (mm): 30 mm
- Framework / Lining: One Side
Documents
Need CAD, BIM, Test Reports and Technical Specifications?
Log in to access CAD .dwg files.
Log in and add a System Specification to a Project to access BIM files, Test Reports, and Technical Specification files.
Image
SpecSure
A unique warranty that confirms British Gypsum proprietary systems will perform as specified for the lifetime of the building.