Framework fixing	British Gypsum Wafer Head Jack-Point Screws 13mm
Suspension fixing	British Gypsum Wafer Head Jack-Point Screws 13mm Gypframe MF11 Nut and Bolt
Ceiling screws	Layer 1: British Gypsum Drywall Screws 25mm
Soffit connection	Gypframe MF12 Soffit Cleat
Framework fixing (alternative)	Gypframe MF9 Connecting Clip
Suspension type	Gypframe MF8 Strap Hanger
Suspension type (alternative)	Gypframe FEA1 Steel Angle
Primary framework	Gypframe MF7 Primary Support Channel
Secondary framework	Gypframe MF5 Ceiling Section
Perimeter framing	Gypframe MF6 Perimeter Channel
Access hatch	Gyptone Quattro 46 Access Hatch
Ceiling board	Layer 1: Gyptone Quattro 46

Details

This section should be read in conjunction with the Products list.

Framework Fixing: Ceiling sections fixed to primary framework using wafer head screws or clips.
Finishing Requirements: To achieve the specified performances, the system should be finished using Gyproc jointing products. See the product range guides on the British Gypsum website for more information.
Loadbearing: No
Maximum Ceiling Load (kg/m2): 30 kg/m²
Other Requirements: SpecSure^® system performance warranty confirms that British Gypsum proprietary systems will perform as specified for the lifetime of the building. The SpecSure^® warranty requires that all components are specified in full and constructed in accordance with British Gypsum’s installation guidance. For more details see the British Gypsum website. Always check with the design team before making any changes to the chosen specification, ensuring appropriate substantiation is sought to confirm that the solution still meets all required project performances.
Perimeter Framing: Perimeter channel suitably fixed to background at 600mm centres.
Screw: Fix ceiling boards securely to all supports at maximum 230mm centres. Fix working from the centre of each board. Position screws not less than 13mm from cut edges and 10mm from bound edges of boards. Set screw heads flush with plasterboard surface; do not break paper or gypsum core.
Structural Background: Concrete
Maximum Cavity / Plenum (mm): 5600 mm
Minimum Cavity / Plenum (mm): 400 mm
Primary Framework Centres (mm): 1200 mm
Access Hatch: Access in to ceiling cavity can be achieved by installing a complete frame and hatch comprising a frame 600mm x 600mm x 12.5mm thick and hatch opening 510mm x 510mm x 19mm thick including back panel.
Secondary Framework Centres (mm): 600 mm
Suspension Type: Strap hanger should be used for suspension up to 1000mm. Steel angle section can be used up to 5600mm.
Suspension Type Centres (mm): 1200 mm