|StandardsBS EN ISO 354,Acoustics - Measurement of sound absorption in a reverberation room.||Standard types|
|Framework fixing||British Gypsum Wafer Head Jack-Point Screws 13mm|
|Suspension fixing||British Gypsum Wafer Head Jack-Point Screws 13mm
Gypframe MF11 Nut and Bolt
|Perimeter framing||Gypframe MF6 Perimeter Channel|
|Secondary framework||Gypframe MF5 Ceiling Section|
|Suspension type||Gypframe FEA1 Steel Angle|
|Primary framework||Gypframe MF7 Primary Support Channel|
|Joint compound||Rigitone Vario 60 Jointing Material|
|Ceiling screws||Layer 1: Rigitone Screws 30mm|
|Soffit connection||Gypframe MF12 Soffit Cleat|
|Ceiling board||Layer 1: Rigitone 8/18 Q|
This section should be read in conjunction with the Products list.
- Framework Fixing: Ceiling sections fixed to primary framework using wafer head screws.
- Finishing Requirements: To achieve the specified performances, the system should be finished using Gyproc jointing products. See the product range guides on the British Gypsum website for more information.
- Loadbearing: No
- Maximum Ceiling Load (kg/m2): 30 kg/m²
- Other Requirements: SpecSure® system performance warranty confirms that British Gypsum proprietary systems will perform as specified for the lifetime of the building. The SpecSure® warranty requires that all components are specified in full and constructed in accordance with British Gypsum’s installation guidance. For more details see the British Gypsum website. Always check with the design team before making any changes to the chosen specification, ensuring appropriate substantiation is sought to confirm that the solution still meets all required project performances.
- Perimeter Framing: Perimeter channel suitably fixed to background at 600mm centres.
- Screw: Fix ceiling boards securely to all supports at maximum 230mm centres (reduced to 150mm at board ends). Do not fix into ceiling perimeter framing. Fix working from the centre of each board. Position screws not less than 13mm from cut edges and 10mm from bound edges of boards. Set screw heads flush with plasterboard surface; do not break paper or gypsum core.
- Structural Background: Concrete
- Maximum Cavity / Plenum (mm): 5600 mm
- Minimum Cavity / Plenum (mm): 200 mm
- Primary Framework Centres (mm): 1000 mm
- Secondary Framework Centres (mm): 330 mm
- Suspension Type: Lower end of suspension fixed to primary framework using two wafer head screws and upper end of suspension secured to soffit via soffit cleat / nut and bolt.
- Suspension Type Centres (mm): 900 mm
Log in to access CAD .dwg files.
Log in and add a System Specification to a Project to access BIM files, Test Reports, and Technical Specification files.
Please add this Specification to a project and go to that Project to access the related Test Reports.
|Test report label||Test report name|
|Test report labelSound Absorption Test Report||Test report nameLOCtiles|
A unique warranty that confirms British Gypsum proprietary systems will perform as specified for the lifetime of the building.