System Ref (e.g. A206A179)

Partitions Help

A full range of lightweight partition systems

Fire Integrity (mins) (BS476: Part 22: 1987)

Fire Insulation (mins) (BS476: Part 22: 1987)

Sound Insulation Unit (dB) Correction factor (dB) Sound Insulation (dB)

Sound insulation is the term used to describe the reduction in the level of sound that passes between two spaces separated by a dividing element. The level of this reduction is stated in decibels (dB). The higher the number, the greater the reduction in the noise that is transmitted from one room to the other.

The Building Regulation requirements regarding the sound insulation of walls and partitions only relate to the transmission of airborne noise. These include speech, musical instruments, loudspeakers and other sounds that originate in the air.

Sound insulation rating methods - A number of different rating methods are used to express the level of sound insulation provided by a partition solution. It is critical to check which sound insulation rating method a project specification requires before using this selector. The four most commonly used in relation to partitions, as defined in BS EN ISO 717: Part 1: 1997 (airborne), are described below:

Rw (laboratory) - The single figure rating method used for laboratory airborne sound insulation tests. The figure indicates the amount of sound energy being stopped by a separating building element when tested in isolation in the absence of any flanking paths.

DnTw (site) - The single figure rating method that gives the airborne sound insulation performance between two adjacent rooms within a building as measured in a post-construction, on-site test. The result achieved is affected not only by the separating element but also by the surrounding structure and junction details and the quality of workmanship.

Rw + Ctr / DnTw + Ctr - The Ctr adaptation term is a correction that can be added to either the Rw (laboratory) or DnTw (site) airborne rating. This term was originally developed to describe how a building element would perform if subject to excessive low frequency sound sources, such as traffic and railway noise.

Correction factor (only relates to DnTw / DnTw + Ctr)
The acoustic environment of the room and / or the building and the ability to reduce or eliminate air paths in the vicinity of the sound reducing element, e.g. doorsets, glazing, suspended ceiling cavities, ductwork, etc., will have a significant effect on the sound insulation performance between two spaces. For these reasons it is unlikely that figures quoted from laboratory test conditions will be achieved in practice. In order to account for this difference between site performance and laboratory tests, a correction factor is often applied. Typically, 7dB is used for DnTw requirements and 9dB for DnTw + Ctr. For example, a project needing to achieve 50 DnTw dB on site will require a partition which achieved 57 Rw dB in its laboratory test. If there is a high level of confidence in the site conditions being favourable to good acoustic performance, then a lower correction factor may be used.

NB. It is strongly advised that the services of an acoustic consultant are employed when considering project specific site performance criteria and selecting an appropriate laboratory-to-site correction factor.

Height required (mm) L/240 @ 200pa

Duty Rating BS5234: Parts 1 & 2: 1992

Partition thickness (mm)

Metal stud width (mm)

Metal stud profile

Metal stud gauge

Board Type

System	System Ref	Partition Thickness (mm)	Stud type	Centres (mm)	Board side 1	Board side 2	Insulation	Fire Integrity (mins)	Fire Insulation (mins)	Max. Partition Height (mm)	Duty rating	Sound Insulation R_w dB	R_w + C_tr dB	Go to basket
GypWall RAPID dB Plus	A139A001	75	Gypframe 43 AS 50 AcouStud	900	Gyproc SoundBloc RAPID (15)	Gyproc SoundBloc RAPID (15)	N/A	30	30	2400	Medium	40	N/A	close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. A139A001 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. Key facts GypWall RAPID dB Plus combines high levels of performance and a narrow footprint, compared with timber and masonry alternatives Speed and efficiency of installation are achieved through the use of lightweight Gypframe stud framing and single layer Gyproc SoundBloc RAPID linings, with a special width and thickness configuration Services are easily accommodated within the partition; through the pre-finished service cut-outs within Gypframe AcouStuds
GypWall RAPID dB Plus	A139A003	75	Gypframe 43 AS 50 AcouStud	900	Gyproc SoundBloc RAPID (15)	Gyproc SoundBloc RAPID (15)	25mm Isover Acoustic Partition Roll (APR 1200)	30	30	2400	Medium	44	N/A	close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. A139A003 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. Key facts GypWall RAPID dB Plus combines high levels of performance and a narrow footprint, compared with timber and masonry alternatives Speed and efficiency of installation are achieved through the use of lightweight Gypframe stud framing and single layer Gyproc SoundBloc RAPID linings, with a special width and thickness configuration Services are easily accommodated within the partition; through the pre-finished service cut-outs within Gypframe AcouStuds
GypWall RAPID dB Plus	A139A005	75	Gypframe 43 AS 50 AcouStud	450	Gyproc SoundBloc RAPID (15)	Gyproc SoundBloc RAPID (15)	N/A	30	30	2700	Medium	40	N/A	close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. A139A005 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. Key facts GypWall RAPID dB Plus combines high levels of performance and a narrow footprint, compared with timber and masonry alternatives Speed and efficiency of installation are achieved through the use of lightweight Gypframe stud framing and single layer Gyproc SoundBloc RAPID linings, with a special width and thickness configuration Services are easily accommodated within the partition; through the pre-finished service cut-outs within Gypframe AcouStuds
GypWall RAPID dB Plus	A139A006	75	Gypframe 43 AS 50 AcouStud	450	Gyproc SoundBloc RAPID (15)	Gyproc SoundBloc RAPID (15)	25mm Isover Acoustic Partition Roll (APR 1200)	30	30	2700	Medium	43	N/A	close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. A139A006 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. Key facts GypWall RAPID dB Plus combines high levels of performance and a narrow footprint, compared with timber and masonry alternatives Speed and efficiency of installation are achieved through the use of lightweight Gypframe stud framing and single layer Gyproc SoundBloc RAPID linings, with a special width and thickness configuration Services are easily accommodated within the partition; through the pre-finished service cut-outs within Gypframe AcouStuds
GypWall RAPID dB Plus	A139A011	102	Gypframe 70 AS 50 AcouStud	450	Gyproc SoundBloc RAPID (15)	Gyproc SoundBloc RAPID (15)	N/A	30	30	2700	Medium	42	N/A	close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. A139A011 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. Key facts GypWall RAPID dB Plus combines high levels of performance and a narrow footprint, compared with timber and masonry alternatives Speed and efficiency of installation are achieved through the use of lightweight Gypframe stud framing and single layer Gyproc SoundBloc RAPID linings, with a special width and thickness configuration Services are easily accommodated within the partition; through the pre-finished service cut-outs within Gypframe AcouStuds
GypWall RAPID dB Plus	A139A012	102	Gypframe 70 AS 50 AcouStud	450	Gyproc SoundBloc RAPID (15)	Gyproc SoundBloc RAPID (15)	25mm Isover Acoustic Partition Roll (APR 1200)	30	30	2700	Medium	46	N/A	close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. A139A012 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall RAPID dB Plus Metal stud housing partition system GypWall RAPID dB Plus is a non-loadbearing, high performance internal wall partition system for use in residential developments. This versatile system incorporates Gyproc SoundBloc RAPID linings and Gypframe AcouStuds to provide robust acoustic solutions that comply with Building Regulations Approved Document E (England and Wales) and Technical Handbook Section 5 (Scotland). There are two build solutions: 450mm stud framing without noggings, and 900mm stud framing with horizontal noggings. Key facts GypWall RAPID dB Plus combines high levels of performance and a narrow footprint, compared with timber and masonry alternatives Speed and efficiency of installation are achieved through the use of lightweight Gypframe stud framing and single layer Gyproc SoundBloc RAPID linings, with a special width and thickness configuration Services are easily accommodated within the partition; through the pre-finished service cut-outs within Gypframe AcouStuds
GypWall CLASSIC	A206001	75	Gypframe 48 S 50 'C' Stud	600	Gyproc WallBoard (12.5)	Gyproc WallBoard (12.5)	N/A	30	30	2500	Medium	34	N/A	close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. A206001 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. Key facts FAQ's Video Wide range of performances achievable through a combination of interchangeable Gyproc plasterboards, Gypframe metal, Thistle finish plasters and Saint-Gobain Isover insulation Optimised acoustic performance for a given footprint through the use of Gypframe AcouStuds Quick to install compared to masonry or timber frame alternatives and allows transformation of building layouts with minimal disruption Non-hygroscopic Gypframe metal framework will not twist, warp or rot Easy accommodation of services within the stud cavity due to pre-cut service holes within the Gypframe metal studs Is Gyproc FireStrip required Where included in the detail, Gyproc FireStrip is an essential component in maintaining the fire resistance of a partition. What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer? Fire resistance performance is based on complete systems such as a partition, wall, ceiling membrane or floor, therefore plasterboard cannot be considered on their own in terms of fire resistance. Which partition types provide high acoustic performance with minimum impact to space? GypWall CLASSIC using Gypframe AcouStuds, GypWall QUIET SF and GypWall STAGGERED are all good options to meet this requirement. How To - Install GypWall CLASSIC
GypWall CLASSIC	A206002	80	Gypframe 48 S 50 'C' Stud	600	Gyproc WallBoard (15)	Gyproc WallBoard (15)	N/A	30	30	2800	Medium	36	N/A	close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. A206002 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. Key facts FAQ's Video Wide range of performances achievable through a combination of interchangeable Gyproc plasterboards, Gypframe metal, Thistle finish plasters and Saint-Gobain Isover insulation Optimised acoustic performance for a given footprint through the use of Gypframe AcouStuds Quick to install compared to masonry or timber frame alternatives and allows transformation of building layouts with minimal disruption Non-hygroscopic Gypframe metal framework will not twist, warp or rot Easy accommodation of services within the stud cavity due to pre-cut service holes within the Gypframe metal studs Is Gyproc FireStrip required Where included in the detail, Gyproc FireStrip is an essential component in maintaining the fire resistance of a partition. What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer? Fire resistance performance is based on complete systems such as a partition, wall, ceiling membrane or floor, therefore plasterboard cannot be considered on their own in terms of fire resistance. Which partition types provide high acoustic performance with minimum impact to space? GypWall CLASSIC using Gypframe AcouStuds, GypWall QUIET SF and GypWall STAGGERED are all good options to meet this requirement. How To - Install GypWall CLASSIC
GypWall CLASSIC	A206003	100	Gypframe 48 S 50 'C' Stud	600	Gyproc WallBoard (2 x 12.5)	Gyproc WallBoard (2 x 12.5)	N/A	60	60	3400	Severe	42	N/A	close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. A206003 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. Key facts FAQ's Video Wide range of performances achievable through a combination of interchangeable Gyproc plasterboards, Gypframe metal, Thistle finish plasters and Saint-Gobain Isover insulation Optimised acoustic performance for a given footprint through the use of Gypframe AcouStuds Quick to install compared to masonry or timber frame alternatives and allows transformation of building layouts with minimal disruption Non-hygroscopic Gypframe metal framework will not twist, warp or rot Easy accommodation of services within the stud cavity due to pre-cut service holes within the Gypframe metal studs Is Gyproc FireStrip required Where included in the detail, Gyproc FireStrip is an essential component in maintaining the fire resistance of a partition. What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer? Fire resistance performance is based on complete systems such as a partition, wall, ceiling membrane or floor, therefore plasterboard cannot be considered on their own in terms of fire resistance. Which partition types provide high acoustic performance with minimum impact to space? GypWall CLASSIC using Gypframe AcouStuds, GypWall QUIET SF and GypWall STAGGERED are all good options to meet this requirement. How To - Install GypWall CLASSIC
GypWall CLASSIC	A206004	110	Gypframe 48 S 50 'C' Stud	600	Gyproc WallBoard (2 x 15)	Gyproc WallBoard (2 x 15)	N/A	90	90	3700	Severe	45	N/A	close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. A206004 has been added to the basket Add your own reference You will need register and login to access premium files such as NBS (word & PDF), .dwg CAD, and .rvt BIM files Add more specifications View basket Close GypWall CLASSIC A highly versatile metal stud partition system. GypWall CLASSIC is the industry’s original lightweight non-loadbearing drywall partition system, providing cost-effective, multi-purpose solutions suitable for all types of buildings. Key facts FAQ's Video Wide range of performances achievable through a combination of interchangeable Gyproc plasterboards, Gypframe metal, Thistle finish plasters and Saint-Gobain Isover insulation Optimised acoustic performance for a given footprint through the use of Gypframe AcouStuds Quick to install compared to masonry or timber frame alternatives and allows transformation of building layouts with minimal disruption Non-hygroscopic Gypframe metal framework will not twist, warp or rot Easy accommodation of services within the stud cavity due to pre-cut service holes within the Gypframe metal studs Is Gyproc FireStrip required Where included in the detail, Gyproc FireStrip is an essential component in maintaining the fire resistance of a partition. What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer? Fire resistance performance is based on complete systems such as a partition, wall, ceiling membrane or floor, therefore plasterboard cannot be considered on their own in terms of fire resistance. Which partition types provide high acoustic performance with minimum impact to space? GypWall CLASSIC using Gypframe AcouStuds, GypWall QUIET SF and GypWall STAGGERED are all good options to meet this requirement. How To - Install GypWall CLASSIC

Sustainability

Sectors

Careers

Product ranges:

Useful tools:

Certified Plasterer Scheme

White Book content

Useful tools:

White Book System Selector

Useful services

Help and training

Full range of courses

Literature

Brochures & Leaflets

White Book

Partitions Help

A full range of lightweight partition systems

453 result(s) found.

How To - Install GypWall CLASSIC

How To - Install GypWall CLASSIC

How To - Install GypWall CLASSIC

How To - Install GypWall CLASSIC

Login

Careers

Certified Plasterer Scheme

White Book System Selector

Full range of courses

White Book

Is Gyproc FireStrip required

What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer?

Which partition types provide high acoustic performance with minimum impact to space?

How To - Install GypWall CLASSIC

Is Gyproc FireStrip required

What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer?

Which partition types provide high acoustic performance with minimum impact to space?

How To - Install GypWall CLASSIC

Is Gyproc FireStrip required

What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer?

Which partition types provide high acoustic performance with minimum impact to space?

How To - Install GypWall CLASSIC

Is Gyproc FireStrip required

What is the fire resistance performance of Gyproc plasterboard? Will I achieve 60 minutes fire resistance from 12.5mm Gyproc FireLine? What fire rating does a Board give? What fire rating does FireLine Board offer?

Which partition types provide high acoustic performance with minimum impact to space?

How To - Install GypWall CLASSIC