Gyproc Drywall Primer Installation Instructions

Our guidance below shows the recommended way to apply Gyproc Drywall Primer. All times stated are approximate.

Get wall and ceiling backgrounds ready for decoration.

Installation Guidance

Step 1

  • After joint treatment is complete, clean down boards and ensure they are free from dust

Step 2

  • Stir before use

Step 3

  • Apply with a brush or medium pile roller

Step 4

  • Wait until dry and then begin decoration

Times and processes are given as guidance. On site practice may vary.

Note: Gyproc Drywall Primer may be used as a base for most wallcoverings, but solvent-based wall covering adhesives should not be used. If steam stripping resistance or a vapour barrier is required use Gyproc Drywall Sealer instead.