Menu
Gyproc ThermaLine PIR MR

Gyproc ThermaLine PIR MR

A high performing insulating plasterboard. Designed for use in British Gypsum wall lining and partition systems where both moisture resistance and greater thermal performance are required.

12.5mm Gyproc Moisture Resistant Board factory bonded to rigid Polyisocyanurate foam with zero Ozone Depletion Potential (ODP) and a Global Warming Potential (GWP) of less than 5. Both faces of the Polyisocyanurate insulant are lined with a multi-layer vapour control barrier, with a Class 0 fire performance (Euroclass B-S 1, d0).

  • Faced with Gyproc Moisture Resistant board
  • Backed with pale yellow Polyisocyanurate foam with a 2 x vapour control barrier
  • Complies with EN 13950
  • Available in tapered edge only
  • Thermal Conductivity: Gyproc WallBoard 0.19W/mK
  • Thermal Conductivity: Polyisocyanurate foam 0.022W/mK

 

For fixings, see Drywall Timber Screws and Nailable Plugs.

38mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
5200028508 1200 2400 9.3 T/E 1.15
5200028538** 1200 2400 10.1 T/E 1.15

53mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
5200028507* 1200 2400 10.5 T/E 1.85
5200028539** 1200 2400 10.5 T/E 1.85

63mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
5200028506* 1200 2400 10.9 T/E 2.3
5200028540** 1200 2400 10.9 T/E 2.3

78mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
5200028505* 1200 2400 11.3 T/E 3.0
5200028541** 1200 2400 11.3 T/E 3.0

93mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
5200028504* 1200 2400 11.8 T/E 3.65
5200028542** 1200 2400 11.8 T/E 3.65

Notes

* Available on extended lead time
** Small pallet quantity available on extended lead time

Please note: 78mm board and 93mm board will be available Summer 2013

What is the thermal conductivity of Gyproc ThermaLine laminates?

Our Gyproc ThermaLine laminates comprise of plasterboard (thermal conductivity 0.19 W/mK) and rigid foam insulation (thermal conductivity of the foam ranges from 0.02 to 0.04 W/mK depending on type).

How do you upgrade existing walls thermally?

This can be achieved either externally (EWI) using an insulated render system such as Weber, alternatively this can be achieved internally (IWI) using a frame system (such as our GypLyner UNIVERSAL) comprising of insulation within the cavity or through the use of an insulation backed plasterboard (installed in one of our DriLyner systems). Please refer to WHITE BOOK Chapter 07 Section 01 Page 02 for an overview of our British Gypsum wall linings range.

Related Documents

Close

Related Documents

Related News and Blogs

Close

Related News and Blogs