Last updated:
Description
DriLyner Dab is a lining system for either masonry or plastered backgrounds, where Gyproc Plasterboards or Gyproc ThermaLine insulated boards are fixed directly and simply using Gyproc DriWall Adhesive and Gyproc Sealant.
DriLyner Dab systems allow for a wide range of U-values to be achieved to suit project requirements, through our extensive portfolio of Gyproc ThermaLine laminate types and thicknesses. It also has minimal thermal bridging due to the use of non-metallic adhesive dabs.
DriLyner Dab systems allow for a wide range of U-values to be achieved to suit project requirements, through our extensive portfolio of Gyproc ThermaLine laminate types and thicknesses. It also has minimal thermal bridging due to the use of non-metallic adhesive dabs.
Key facts
- DriLyner Dab is a versatile and simple wall lining system that provides key thermal and acoustic performances to be achieved through direct fixing of the correct Gyproc Plasterboard or ThermaLine Laminate to masonry or plastered backgrounds.
- Thermal performance from 0.35 - 0.17 W/m2K.
- Allows Gyproc ThermaLine laminates to be installed to existing plastered surfaces providing they are sound and free of damp.
- Provides a thermally responsive environment with quick heating time as a result of positioning the insulation layer on the warm side of the room.
- Wide range of U-values achievable to suit project requirements through our extensive selection of Gyproc ThermaLine laminate types and thicknesses.
- Minimal thermal bridging due to the use of non-metallic gypsum adhesive dabs and thermally-broken fixings.
- Minimal loss in room space due to narrow drylining cavity plus the thickness of the Gyproc plasterboard and any finish applied.
- Allows minor surface irregularities to be taken out within the drylining cavity formed by the gypsum adhesive dabs.
- Services can be incorporated with a reduced level of chasing.
Standards
| Standards | Standard types |
|---|---|
| Standards | Standard types |
Documents
Need CAD, BIM, Test Reports and Technical Specifications?
Log in to access CAD .dwg files.
Log in and add a System Specification to a Project to access BIM files, Test Reports, and Technical Specification files.
Image
