Below you’ll find all of the information needed to complete wall lining, partition, floor and ceiling systems, no matter the size and complexity of the project specification.
What is the minimum temperature for Gypsum Products?
Thistle plasters should only be applied to backgrounds where the minimum temperature will remain at 2°C or above until dry (except ThistlePro DuraFinish which should remain at 5°C or above until dry.) Dry, bagged plaster isn't affected by low temperatures.
Does ThistlePro FastSet Finish qualify for the British Gypsum SpecSure® systems warranty?
No. ThistlePro FastSet Finish is not a performing system and therefore does not qualify on its own for the SpecSure® warranty. However, ThistlePro FastSet Finish is covered by the product guarantee, meaning that in the unlikely event of a product failure, it’ll be repaired or replaced by British Gypsum.
Although there is no definitive maximum room temperature for plastering, additional care should be taken when outside temperatures are considered higher than ‘normal’, as the plaster setting times may be reduced.