"Solution Product Name","Solution Product Description","Last review date","Last updated date","Minimum Cavity / Plenum (mm)","Maximum Cavity / Plenum (mm)","Finishing Requirements","Maximum Ceiling Load (kg/m2)","Other Requirements","Perimeter Framing","Primary Framework Centres (mm)",Screw,"Secondary Framework Centres (mm)","Sound Absorption Class","Sound Absorption Coefficient (αw)","Structural Background","Suspension Type","Suspension Type Centres (mm)","Joint compound","Framework fixing","Ceiling screws, Layer 1","Suspension fixing","Soffit connection","Insulation, Layer 1","Perimeter framing","Ceiling board, Layer 1","Suspension type","Secondary framework","Primary framework" "C10A061 (EN)","GypCeiling MF suspended ceiling fixed to concrete structure to give a 200mm plenum depth and lined with one layer of Rigitone 10/23 and 50mm Isover Timber Frame Batt 32 in the plenum.",22.09.2021,02.02.2024,200,5600,"To achieve the specified performances, the system should be finished using Rigitone jointing products. See the product range guides on the British Gypsum website for more information.",30,"SpecSure® system performance warranty confirms that British Gypsum proprietary systems will perform as specified for the lifetime of the building. The SpecSure® warranty requires that all components are specified in full and constructed in accordance with British Gypsum’s installation guidance. For more details see the British Gypsum website. Always check with the design team before making any changes to the chosen specification, ensuring appropriate substantiation is sought to confirm that the solution still meets all required project performances.","Perimeter channel suitably fixed to background at 600mm centres.",1000,"Fix ceiling boards securely to all supports at maximum 230mm centres (reduced to 150mm at board ends). Do not fix into ceiling perimeter framing. Fix working from the centre of each board. Position screws not less than 13mm from cut edges and 10mm from bound edges of boards. Set screw heads flush with plasterboard surface; do not break paper or gypsum core.",330,C,1,Concrete,"Steel angle section can be used up to 5600mm.",900,"Rigitone Vario 60 Jointing Material","British Gypsum Wafer Head Jack-Point Screws 13mm","Rigitone Screws 30mm","British Gypsum Wafer Head Jack-Point Screws 13mm Gypframe MF11 Nut and Bolt","Gypframe MF12 Soffit Cleat","50mm Isover Timber Frame Batt 32","Gypframe MF6 Perimeter Channel","Rigitone 10/23","Gypframe FEA1 Steel Angle","Gypframe MF5 Ceiling Section","Gypframe MF7 Primary Support Channel"