"Solution Product Name","Solution Product Description","Last review date","Last updated date","Abutment Fixing","Approx. Weight (kg/m2)","Base Channel Fixing","Dropped Soffit","Deflection Allowance","Duty Rating","Finishing Requirements","Fire Insulation (mins)","Fire Integrity (mins)","Fixing Strap","Horizontal Joint","Maximum Height","Maximum Height (mm)","Other Requirements","Partition Thickness (mm)","Retaining Channel",Screw,Sealant,"Sound Insulation (Airborne) Rw (dB)","Stud Centres (mm)","Horizontal joint","Head channel","Base channel","Fixing strap",Sealant,"Abutment channel",Core,"Retaining channel","Screws side 1, Layer 1","Screws side 1, Layer 2","Screws side 1, Layer 3",Stud,"Board side 1, Layer 1","Board side 1, Layer 2","Board side 1, Layer 3" "G306031 (A) (EN)","Gypframe 92 I 90 ‘I’ Studs at 600mm centres with Glasroc F FireCase 20mm between studs, secured by Gypframe G105 Retaining Channel. Three layers of Glasroc F FireCase 15mm to non-shaft side. For heights up to 4200mm.",22.09.2021,02.02.2024,"Gypframe starter channel suitably fixed wall at 600mm centres in two lines staggered by 300mm.",60,"Gypframe channel suitably fixed to floor at 600mm centres in two lines staggered by 300mm.","For principles of deflection head construction refer to detail ST‐129‐Z2L3‐07.","Vertical deflection only. To be determined by a Structural Engineer.",Severe,"To achieve the specified performances, the system should be finished using either one of our Thistle or ThistlePro plasters, or Gyproc jointing products. See the product range guides on the British Gypsum website for more information.",120,120,"Used to support horizontal board joints in face layer of multiple layer board linings and enable board screw fixing at 300mm centres.","Horizontal board joints in core layer closed off by inserting steel angle between board joints and 122mm strip of core board fire stop with beads of sealant along both longer edges fixed to angle using three drywall screws.","The maximum heights quoted are limited by the fire state field of application or by limiting deflection of L/240 at 200 Pa, whichever is the lower of the two.",4200,"SpecSure® system performance warranty confirms that British Gypsum proprietary systems will perform as specified for the lifetime of the building. The SpecSure® warranty requires that all components are specified in full and constructed in accordance with British Gypsum’s installation guidance. For more details see the British Gypsum website. Always check with the design team before making any changes to the chosen specification, ensuring appropriate substantiation is sought to confirm that the solution still meets all required project performances.",139,"Retaining channels inserted between the face of the coreboard and the flange of the stud / starter channel.","Board layers are fixed securely to Gypframe metal supports around the perimeter of the board and intermediate stud positions at maximum 300mm centres. External corners reduce fixings to 200mm. Drywall screws can be used for fixing boards to metal profiles with a thickness of 0.8mm or less (excluding 'I' studs). All joints staggered between layers. Fix working from the centre of each board. Position screws not less than 13mm from edges of boards. Set screw heads flush with plasterboard surface; do not break gypsum core.","Locate sealant at junctions with adjoining structure and other air paths. Apply as a continuous bead to clean, dry, dust-free surfaces, leaving no gaps. After application of sealant, bulk fill gaps between floor and underside of plasterboard using Gyproc jointing compound. For pressurised airshafts and service ducts apply a continuous bead of sealant leaving no gaps to all framing members at perimeter junctions with walls, floors and ceilings, air gaps around openings, and other potential air leakage points. To frame members prior to fitting core boards and around fire stops cloaking horizontal core board joints. To all metal framing around board perimeters of first layer boarding and board perimeters when fixing outer layer board.",44,600,"Glasroc F FireCase 20mm Gypframe GA3 Steel Angle","Gypframe 94 EDC 70 Extra Deep Flange Floor & Ceiling Channel","Gypframe 94 FEC 50 Folded Edge Standard Floor & Ceiling Channel","Gypframe GFS1 Fixing Strap","Gyproc Sealant","Gypframe 92 SC 90 Starter Channel","Glasroc F FireCase 20mm","Gypframe G105 Retaining Channel","British Gypsum Jack-Point Screws 35mm","British Gypsum Jack-Point Screws 41mm","British Gypsum Jack-Point Screws 60mm","Gypframe 92 I 90 'I' Stud","Glasroc F FireCase 15mm","Glasroc F FireCase 15mm","Glasroc F FireCase 15mm"