Thistle One Coat plaster Installation Instructions
Our guidance below shows the recommended way to apply Thistle One Coat Plaster. All times stated are approximate.
Thistle One Coat plaster helps you repair and finish walls with less hassle.
- Add approx. 7.5 litres of clean water per 12.5kg bag to mixing bucket. Gradually add the plaster while mixing
- Apply in 2 layers to make up approx. layer of 13mm (10mm for ceiling applications)
45 - 90 mins
- Flatten off with the appropriate tool for size of the job (i.e. trowel or rule)
120 - 150 mins
- Continue to flatten and when firm scour with sponge float to raise fat to the surface. Trowel progressively to a smooth matt surface. The sponging can be done 2-4 times, depending on the finish required
Times and processes are given as guidance. On site practice may vary. Finishing times are reduced by suction and extended by cold weather conditions.
NOTE: Maximum thickness is 25mm, built up in layers of around 8mm. If overall thickness exceeds 25mm, metal lathing will need to be fixed into the substrate in order to support the additional weight. Use the Thistle Plaster Selector Guide to ensure that your chosen product is suitable for the background that you are applying it to.
For very high suction backgrounds: Ensure adequate suction control with water takes place prior to application.