Menu
ThistleBond-it

Thistle Bond-It

Bonding agent for smooth and/or low suction backgrounds providing an adequate key.

Bonding agent for smooth and/or low suction backgrounds. It provides a chemical key as well as creating a mechanical key with the included aggregate particles. Applied in one coat by roller or brush onto the background, this can then be plastered over when dry. Green in colour to aid identification of treated areas. Typical coverage needed for 100m² is approx. 22 litres undiluted.

  • For use on smooth backgrounds, e.g. concrete with Thistle BondingCoat, or for re-skimming
  • No dilution - so no scope for errors, no time spent mixing, no confusion on site
  • Always used in one coat only - so no decisions to take about background porosity
  • Contains fine aggregates for better mechanical, as well as chemical adhesion
  • Green in colour - so it's easy to see where it's been applied
  • Plastered when dry - so no difficult timing to get right
  • The only product recommended for use with Thistle BondingCoat plaster
Order CodeDimensions
09944/110 litre tub

What is the coverage of ThistleBond-It

The 10 litre tub will cover approximately 45m2 if used undiluted (equates to 4.5m2 per litre). 22 litres would be required to cover 100m2 if used undiluted. Please refer to WHITE BOOK Chapter 10 Section 06 Page 07 for more details.

Can I plaster straight onto a painted wall?

Plastering on existing painted walls is possible if the paint is in very good condition.

Can Thistle UniFinish be used with ThistleBond-it and Thistle GypPrime?

Yes, Thistle UniFinish is compatible with these products.

Can you skim an MR grade board?

Yes, however the board usually needs to be primed with ThistleBond-It.

How do I dot & dab plasterboard to concrete columns and walls?

Providing the concrete is stable and free of release agents you could consider the use of our DriLyner BASIC system. Some concrete will need pre-treatment with ThistleBond-it applied in bands corresponding to adhesive dab location.

Where would you use ThistleBond-it?

ThistleBond-it is usually used in plastering applications where a background requires an improved key.