Menu
Thistle Board Finish

Thistle BoardFinish

Thistle BoardFinish is an ideal skim finish plaster for use on Gyproc plasterboards

This finish coat plaster is suitable for low to medium suction backgrounds, especially plasterboard or Thistle DriCoat undercoat plaster.

BES 6001

  • Suitable for application by hand
  • Conforms to EN 13279-1
  • This product is certified to BES 6001 achieving a rating of 'Excellent'
  • Available in 25kg bags
Order CodeNominal bag weight (kg)Approx coverage (m²)Approx setting time (hours)Shelf life (months)
06059/525101.54

Notes

* Coverage is based on 2mm thickness.

Can you skim an MR grade board?

Yes, however the board usually needs to be primed with ThistleBond-It.

What is the minimum temperature that Thistle plaster can be used at?

We recommend 2°C (5°C for Thistle DuraFinish) as the minimum working temperature in which plaster should be applied. It is important that the temperature does not drop below 0°C during application or in the setting and drying phase.

What thicknesses are plasters applied?

Undercoat plasters are usually 11mm and most finish coat plasters are 2mm thick.

Coverage Calculator

Unsure on the amount of plaster you need for your project? Use our Plaster Coverage Calculator to estimate the surface area and number of plaster bags required for your project. In order to start you will need to know the height and width of each wall, ceiling or area you intend to cover.

Edit product

Wall
Height ()   Width () ²
× =

Your room size is ²