Menu
Rigidur Screws

British Gypsum Rigidur Screws

Corrosion resistant self-tapping steel screws designed for fixing Rigidur H board to framing.

Corrosion-resistant self-tapping zinc plated steel screws with countersunk cross heads. Supplied with screwdriver bits. Suitable for fixing Rigidur h board-to-metal framing sections less than 0.8mm thick (not suitable for ‘I’ studs). Also suitable for fixing to timber supports. Conforms to EN 14566.

Suitability

Suitable for fixing Rigidur h to Gypframe metal framing less than 0.8mm gauge. Also suitable for fixing to timber supports.

Penetration

Ensure a minimum penetration of 10mm into metal framing, through the board.

Additional Information

Supplied with one high performance bit. Complies with BS EN 14566, the European standard relating to drywall fixings.

Order CodeSize (mm)Max Board Thickness (mm)Quantity
27035/230121000
27036/940151000

What screw lengths do I use for fixing to metal & timber?

The screw should be the thickness of the board plus a minimum 10mm penetration into Gypframe metal or the thickness of the board plus a minimum 25mm penetration into timber using our British Gypsum screws. Please refer to the SITE BOOK for more information.