Gyproc ThermaLine BASIC

Gyproc ThermaLine BASIC

Gypsum plasterboard bonded to an expanded polystyrene foam insulate for a basic level of thermal insulation.

9.5mm Gyproc WallBoard factory-bonded to an expanded polystyrene insulant that is both CFC and HCFC-free, meaning zero ODP (Ozone Depletion Potential), and less than 5 GWP (Global Warming Potential). Designed to be used in both refurbishment and new build for walls, ceilings and reveals where a basic level of thermal insulation is required to reduce heat loss from buildings.

  • Faced with ivory coloured Gyproc WallBoard
  • Backed with white coloured expanded polystyrene
  • Available in tapered edge only
  • Complies with EN 13950
  • Thermal Conductivity: WallBoard 0.19W/mK
  • Thermal Conductivity: Basic expanded polystyrene 0.040W/mK

22mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
02151/0 1200 2400 6.5 T/E 0.35

30mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
02163/3 1200 2400 7.2 T/E 0.55

40mm board

Order Code Width (mm) Length (mm) Weight (kg/m²) Edge Type R value
02167/1 1200 2400 8.1 T/E 0.80

What is the thermal conductivity of Gyproc ThermaLine laminates?

Our Gyproc ThermaLine laminates comprise of plasterboard (thermal conductivity 0.19 W/mK) and rigid foam insulation (thermal conductivity of the foam ranges from 0.02 to 0.04 W/mK depending on type).

How do you upgrade existing walls thermally?

This can be achieved either externally (EWI) using an insulated render system such as Weber, alternatively this can be achieved internally (IWI) using a frame system (such as our GypLyner UNIVERSAL) comprising of insulation within the cavity or through the use of an insulation backed plasterboard (installed in one of our DriLyner systems). Please refer to WHITE BOOK Chapter 07 Section 01 Page 02 for an overview of our British Gypsum wall linings range.