A wide variety of decorative effects can be achieved quickly and simply
A wide variety of decorative effects can be achieved quickly and simply using Gyproc accessories to enhance walls and ceilings, and to relieve flat runs of lining, joints and angles. The portfolio of decorative products comprises gypsum cove and cornice profiles and pre-formed, aluminium styletrims. A number of design effects can be achieved by incorporating steps to the wall and ceiling angles, using Gyproc Cornice Battens and Strips.
- Cove and Cornice profiles, used with or without steps to enhance wall and ceiling angles
- Range of aluminium trims to relieve flat runs of lining
- Wide variety of attractive drylined effects
- Simple to install
A wide variety of applications, to provide internal decoration.
Gyproc Cove and Cornice can be installed to clean, dry and sound backgrounds using Gyproc Cove Adhesive or Gyproc Easi-Fill. Where the wall or ceiling has severe irregularities, the profiles can be mechanically fixed using non-rusting screws into plugs. Gaps along the wall or ceiling edge of the profile can be filled with Gyproc Cove Adhesive.
Gyproc Styletrims can be used in conjunction with most British Gypsum wall and ceiling lining systems. Framing centres should not exceed 600mm. Vertical runs of Gyproc Styletrims and all Styletrim joints should be supported by framing members. Where these features occur between normal framing centres, additional members will need to be incorporated. Setting out should therefore be planned before commencing fixing, both to reduce wastage and to allow the position of any extra framing to be determined. Gyproc Styletrim joints should always be backed by plasterboard, and should never be installed so as to give direct contact with framing members. The Gyproc Styletrim profiles are used in conjunction with 12.5mm Gyproc plasterboard linings.